Vintage Bicycle Workshop Standards & Threading Reference Charts
Definitive technical workshop tables compiled from historical framebuilder notebooks, Sutherland's Handbook for Bicycle Mechanics (3rd Edition), and manufacturer factory specifications.
1. Bottom Bracket Shell & Threading StandardsISO / JIS / Metric
| Standard | Shell Width | Thread Spec | Drive Side (Right) | Non-Drive (Left) | Common Brands |
|---|---|---|---|---|---|
| English (BSC / ISO) | 68mm (Road) / 73mm (MTB) | 1.370" x 24 TPI | Left-Hand (Reverse / Clockwise loosen) | Right-Hand (Standard / Counter loosen) | Raleigh, Trek, Specialized, modern Campagnolo & Shimano |
| Italian | 70mm | 36mm x 24 TPI | Right-Hand (Standard thread) | Right-Hand (Standard thread) | Colnago, Bianchi, De Rosa, Pinarello, Cinelli, Masi |
| French | 68mm | 35mm x 1.0mm metric | Right-Hand (Standard thread) | Right-Hand (Standard thread) | Peugeot, Gitane, Motobecane (pre-1982), Stronglight |
| Swiss | 68mm | 35mm x 1.0mm metric | Left-Hand (Reverse thread) | Right-Hand (Standard thread) | Later French high-end frames, Mondia, Allegro, Cilo |
| Raleigh 26 TPI | 71mm / 76mm | 1-3/8" x 26 TPI | Left-Hand (Reverse thread) | Right-Hand (Standard thread) | Nottingham Raleigh 3-speeds, Sports, DL-1, Twenty |
2. 1-Inch Threaded Headset StandardsHead Tube & Crown Race
| Standard | Steerer Thread | Head Tube Cup ID | Crown Race ID | Notes |
|---|---|---|---|---|
| ISO / English | 1" x 24 TPI | 30.2 mm | 26.4 mm | Universal standard on modern and post-1985 classic bikes |
| Italian | 1" x 24 TPI (55ยฐ Whitworth) | 30.2 mm | 26.4 mm | Interchangeable with ISO; slightly different thread angle profile |
| JIS (Japanese) | 1" x 24 TPI | 30.0 mm | 27.0 mm | Found on vintage Japanese bikes (Schwinn, Miyata, Panasonic) |
| French Metric | 25mm x 1.0mm metric | 30.2 mm | 26.5 mm | Keyed washer has a flat rather than a notch |
3. Handlebar & Quill Stem Clamp DiametersCritical Clamping Compatibility
| Diameter | Classification | Representative Brands | Compatibility Warning |
|---|---|---|---|
| 26.4 mm | Old Cinelli Standard | Cinelli 1A, 1R stems & Giro d'Italia / Campione bars (pre-1998) | Never fit 26.0mm bars in 26.4mm stem โ risk of slippage |
| 26.0 mm | Italian / ISO Standard | 3ttt, ITM, Deda, Nitto, Modolo, post-1998 Cinelli | The universal road handlebar clamp standard |
| 25.4 mm (1") | English / JIS / MTB | SR Sakae, Sugino, GB, Nitto flat bars, vintage BMX | Standard for flat/riser bars and older British drop bars |
| 25.0 mm | French Metric | AVA, Pivo, Belleri, Philippe Professionnel | Quill diameter is 22.0mm (instead of 22.2mm ISO) |
4. Rear Dropout Spacing Over-Locknut-Dimension (O.L.D.)Hub Width & Speeds
| O.L.D. Width | Drivetrain Configuration | Typical Era | Hub Models |
|---|---|---|---|
| 110 โ 114 mm | 3-Speed Internal Gear Hub / Track Pista | 1930s โ 1970s | Sturmey-Archer AW, Campagnolo Record Pista |
| 120 mm | 5-Speed Freewheel (Narrow 10-Speed) | 1950s โ late 1970s | Campagnolo Gran Sport, Nuovo Record, Normandy Luxe, Atom |
| 126 mm | 6-Speed & 7-Speed (Ultra/Narrow cogs) | late 1970s โ late 1980s | Campagnolo Super Record, Shimano Dura-Ace 7400, SunTour Superbe |
| 130 mm | 8-Speed, 9-Speed, 10-Speed Cassette (Modern Road) | 1990s โ Present | Shimano 6400/7402, Campagnolo C-Record / Record 8s |
| 135 mm | Vintage Mountain Bike / Touring | 1982 โ Present | Shimano Deore XT, Suntour XC Pro |