Campagnolo 980
Manufacturer: Campagnolo • Group: 980 • Model: 0104012 • Part ID / SKU: 0104012
Click to Enlarge & Zoom| Category: | Front Derailleurs |
|---|---|
| Name: | Campagnolo 980 |
| Brand: | Campagnolo (Italy) |
| Primary Group: | 980 (1980 - 1985) |
| Model: | 0104012 |
| Part ID / SKU: | 0104012 |
| Years: | 1980 - 1986 |
| Country: | Italy |
| Weight: | 88.0g(3.10 oz) Note: 88 grams (avg)View Weight List |
| Quality Rating: | Very Good4.00/5 (1 vote) |
| Rarity Rating: | Average2.50/5 (1 vote) |
| # Rings Designed For: | Double |
|---|---|
| Outer Plate Markings: | Campagnolo World Logo |
| Clamp Markings: | Campagnolo Script |
| Design Category: | Parallelogram |
| Plate Material: | Steel |
| Clamp Style: | 28.6mm Clamp |
| Cable Attachment Bolt: | 8mm Wrench |
| CableStop: | No |
| Clamp Bolt Type: | 8mm Wrench |
| Max Ring Difference: | 11T |
| Search by Traits: | ✓ # Rings Designed For: Double✓ Outer Plate Markings: Campagnolo World Logo✓ Inner Plate Markings: None✓ Clamp Markings: Campagnolo Script✓ Inner Clamp Markings: None✓ Design Category: Parallelogram✓ Pivot Arm Markings: None✓ Plate Material: Steel✓ Clamp Style: 28.6mm Clamp✓ Cable Attachment Bolt: 8mm Wrench✓ CableStop: No✓ Clamp Bolt Type: 8mm Wrench✓ Max Ring Difference: 11T |
| Photo | Variation # | Component Variation Name | Model Code | Years Produced | Weight | Key Distinguishing Notes |
|---|---|---|---|---|---|---|
![]() | 1 of 1Viewing | Campagnolo 980 | 0104012 | 1980 - 1986 | 88g | According to Velo-Retro's Campagnolo timeline the 980 was intrduced in 1980, the 980 appeared in the 1982 Olympic catalog and last seen in the 1985 catalog 18 as a group (rear and front d's, shifters and hubs). The aluminum body has a C in a parallelogram and a knurled rectangle on the upper arm. Added By: ccmoss on 08/17/07 | Updated By: JFischer on 05/05/11 |
Super derailleur for tripple BOB
I have 3 of these units, and none are identical to each other given their outward appearance. One is from a mid 80s ('84-85?) Aelle tretubi Bottecchia, another is from an '86 Batavus Criterium, and one was obtained as a loose part w/o me knowing what year bike is came from. Neither of the units from my bikes have the diamond "C" marking as mentioned and shown in the example; the loose unit has the diamond "C" and "Campagnolo" scripted band. All units are original and unmodified. One unit (from Bottechia) has no "Campagnolo" script engraved on the front clamp band. All have a small number cast onto the rear of the upper arm and also onto the rear on the main body between the limit screws (unit with bare clamp band: arm and body are both "1"; unit w/scripted band: arm "5" and body "2"; unit with "C" and scripted band: arm "2" and body "3" ). I have no idea why they are different from each other, and also different from the example shown; it may indicate approx. years each unit was made given the obvious differences in appearance (aside from the numbers). Also, 2 of my units weigh approx. 98g+/-.5g (units are clean and free of dirt). The listed average weight above is in error due to 80g being used in the calculation (there is no Campy FD with that weight that I am aware of; it is a typo or weighing error). Campy lists weight at 96g in '82 catalog. Given 2 verified 98g units and the 96g spec. the average weight would be approx. 97.3g. An 80g unit would have had major modification to the degree of possibly compromising its integrity in order to reduce the weight by over 15g.
As a note: this unit was also available in a "leisure"/"touring" variant in the Campy catalog #18 bis (dated 12/85). All Campagnolo did was to exchange the standard cage ("globe" logo) with the same cage that the Victory and Triomphe "leisure" models used (cage #7180099, "shield" logo). This was not available in the 1982 catalog. I have never seen one so it would seem that the Victory and Triomphe models were probably being used by manufacturers/outfitters since those models would essentially provide the same performance/function (possibly less expensive too). The standard cage unit does just fine shifting 42T to 53T rings in my experience. I have never used a 980 unit on a triple ring set-up. I am curious if the previous commenter was in fact using a standard cage unit or possibly the modified unit designed for triple ring set-ups.
Bought a 980 set for a winter trainer back in 1980. Performance was not notably better than the Japanese equivalents, but certainly no worse. Front seemed better constructed than the rear, but never had any failures or even notable issues with either. [Sort of a vanilla review of a vanilla component.]
